Sim2 Nero 3D HB Guía de usuario

SIM2 MultimediaNero 3D-1,Nero 3D-2,Nero 3D HBUser Guide

◦ Memories◦ 3D Controls (3D Mode and Input Formats)OperationThe Nero 3D projector has two IR receivers, one on the front and one on the back of the un

Connections❶ ❷ ❸ ❹ ❺ ❻❼ ❽Inputs❶HDMI 1HDMI 2Accept both HDMI and DVI digital video inputs.❷Components/RGB-HV Four RCA connectors. They accept both sta

3D IR EmitterThe 3D infrared emitter is designed to be placed near the projector and aimed at the screen. It receives the 3D sync signal from the proj

3 InstallationThis section provides instructions for the installation of the Nero 3D projector.Important: Installation procedures should be performed

Ceiling MountingInvert the projector and suspend it from the ceiling using a specific bracket.• To fit the bracket unscrew and remove the 3 rubber fee

If it is not possible to position the projector perpendicular to the projection screen (so that the lens center and screen cen-ter are aligned with ea

throughout the entire signal path◦ highest available resolution, because video sources can deliver full resolu-tion content via HDMI only◦ availabilit

Note: RS-232 communications are limited to 15 m (50 ft.), whereas USB are limited to 5 m (16 ft.).TriggersSome Home Theater devices can be controlled

Switching On and OffSwitching On1. Turn on the main power switch on the right hand side of the projector. The projector enters the low power Standby s

4 OperationViewing 3D Content3D stereo visualization offers clear and sharp 3D images thanks to 3 chip DLP Imaging technology. This technique achieves

Contents3 Important informationSafety3D contentEnvironmentNotice7 Chapter 1: IntroductionAbout This User GuideKey Features and BenefitsSystem Componen

• Switch on your 3D glasses. Refer to the instructions supplied with the glasses to ensure correct operation.• The projector will automatically detect

• 2D display mode for normal 2D material. 3D Input Format adjustment is un-available. PureMotion adjustment is available.3D Input FormatThe Nero 3D ch

Table 4.1Signal 3D Format HDMI 1.4a DVB1920 x 1080p @ 23.98/24 Hz Frame Packing YesSide by Side YesTop and Bottom Yes Yes1920 x 1080p @ 25 Hz Side by

• To enter the Input menu press:Key 0 on the remote control or Source on the projector keypad.• To select an input press the corresponding number on t

PictureThis menu section provides access to common image quality adjustments. Adjust-ments not available for a given input are not displayed in the me

white objects surrounded by light objects with lower level lighting, and try to ensure that all the objects can be separately identified.ColorThis con

Note: When viewing 3D contents, the PureMotion3D mode is automatically activated.DynamicBlack (Nero 3D-2/ 3D HB)This adjustement is available only on

• Normal projects the image occupying the full height of the screen while main-taining the aspect ratio of the input signal. When the input signal asp

◦ Standard the white point associated to the value selected in column 1◦ High, Medium, Low default white balance levels◦ Native the projector native w

Frequency/PhaseThese adjustments, available for progressive signals and for signals from a PC, ensure correspondence between the number of pixels maki

Important informationSafetyTo reduce the risk of electrocution, disconnect the power cord on the rear panel before removing the top cover of the proje

Variable Iris (Nero 3D-2/3D HB)This adjustement is available only on the Nero 3D-2 and Nero 3D HB.Controls the iris in the the optical engine. Larger

LanguageSelects the desired OSD language. The Nero 3D can display the menus in English, Itali-an, French, German, Spanish, Swedish, Portuguese, Russia

Help MenuWhen enabled, the Help bar (providing tips for menu navigation) is displayed at the bottom of the main menu.OSD BackgroundSelects the backgro

Table 4.5Settings VideoRGB/YPrPbGraphics RGBHDMI 1/2 2DHDMI 1/23DBrightness ● ● ● ●Contrast ● ● ● ●Color ● ● ●1●1Sharpness ● ● ● ●Sharpness Mode ● ● ●

The confirmation message “Memory (1-6) recalled” is displayed. The last memory you have recalled becomes the active memory for the current input (the

Sharpness, Filter and Noise Reduction will appear on after the other in the lower part of the screen by pressing ▴ or ▾.MessagesThe following messages

5 TroubleshootingThe projector does not turn on• Make sure the main power switch (at the rear of the projector) is in the On position.• Ensure the pro

3D content is displayed as two near-identical images• If they are next to each other, press the 3D key on the remote control and then choose Side by S

6 SpecificationsProjection Type Digital Light Processing (DLP), 1-chipDLP Type: 0.95 in., 1920 x 1080Optical Engine Die cast, based on SIM2 patented A

Video Standards  Composite: NTSC 3.58/4.43, PAL B/G/H/I/M/N/60, SECAM (automatically selected) Components/RGBHV: 480i, 576i, 480p, 576p, 1080i 50/60

with a flat head screwdriver and replace the fuse. Fit the replacement fuse. Use only type T 10 A L H fuses for the projector.Be careful with cablesMa

7 Projection Distances1.78:1 (16:9) ScreenScreenProjection DistanceVerticalOffset(m)T1 (1.37-1.66:1) T2 (1.75-2.48:1) T3 (2.54-3.90:1)Diagonal Size (i

8 DimensionsNero 3D dimensions in millimeters and (inches).8 Dimensions Nero 3DUser Guide41

SIM2 Multimedia S.p.a.Viale Lino Zanussi, 11 33170 Pordenone – ITALYPhone: + 39 434 383256 Fax: +39 434 383260Email: [email protected] USA1

3D contentDiscomfort (such as eye strain, headaches, motion sickness, nausea, dizziness, disori-entation) may be experienced while watching 3D content

Product disposalThe lamp inside this projector contains mercury and may be subject to special disposal or recycle regulations. Dispose or recycle in a

1 IntroductionThe Nero 3D-1/3D-2/3D HB are high-end compact 1-chip DLP 3D single unit projectors that utilize SIM2’s state-of-the-art optical technolo

System ComponentsYour Nero 3D DLP projector ships with the following items:• 1 x backlit remote control unit (with four AAA/LR03 batteries)• 3 x AC po

2 OverviewRemote Control❶Turn backlight on for about 5 seconds❶❸❹❺❼❽❾⓫⓬⓮❷❻❿⓭⓰⓯❷ turns the projector off❸1-9select inputs and turn the projector on