Sim2 C3X Lumis Manual de instalación descargar pdf (Pagina 18)

C3X Lumis

VARIABLE IRIS

The C3X Lumis Lumis system is equipped with a "Variable

Iris" which allows the user to choose between the best video

settings and very high contrast settings.

The Iris is controlled from the OSD. Press +/- on the remote

control until the ‘Setup’ page appears. Select the option

‘Variable Iris’.

The user may choose from 5 different positions using a scroll

bar ranging from 100 to 0 with 3 intermediate settings, for

a total of 5 possibilities of adjustment.

At value “100” the “Variable Iris” is fully Open, at value "0”

it is fully Closed.

LAMP POWER

If your projection room is particularly dark, the images pro-

jected by the C3X Lumis system may appear to be exces-

sively bright.

Use the LAMP POWER function to reduce the power used

to operate the lamp while achieving maximum image qual-

ity. In this way, the brightness of the image will be adapted

to your projection conditions guaranteeing that the lamp

lasts longer.

RGBs SYNC

RGB Sync indicates where the synchronisation relative to

the RGB signal is supplied.

It normally uses the HV connector of the input (3) and there-

fore RGBs Sync is set to HV mode.

In the case of a RGB sync signal originating from a SCART

outlet (via the SCART/ R-G-B-sync conversion cable), the

R, G and B signals are connected to the speciﬁc RCA con-

nectors (3) and the Sync signal to is connected to the Video

input (1) (yellow connector). RGBs Sync is then be set to

Video mode.

TEST PATTERNS

Displays a series of eight test patterns, which are useful when

installing the system and checking basic functions. Use the

◀ and ▶ keys to select the various test patterns.

INITIAL SETTINGS

Resets the projector to its initial factory settings (except

Position, Orientation, Y/C Delay, Zoom and Focus). Before

performing this operation, conﬁrmation is requested.

Conrm?

No Ye s

Iris Variable

MANUAL LENS RANGE DEVICE

The manual lens range device allows the projected imaged

to be shifted vertically upwards respect to the lens centre.

The range of the vertical shift equals 50% of the height of

the image.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 30 31

Comentarios a estos manuales

Sin comentarios

Sim2 C3X Lumis Manual de instalación Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Proyectores de datos Sim2 C3X Lumis